NETWORK CONTROLLER

PCIe-Rxx05-ECAT
NETWORK CONTROLLER

· EtherCAT master board (EtherCAT distributed network specification,
    Hardware Type - no separate RTOS installation required)
· Support up to 32-axis
· Support Max 32 IO
· Servo and step driver support for CiA-402 (DS-402) Device profile
· Up to 64 nodes can be updated from 0.5 ms to 4 ms (Default 1 msec)
· Support firmware upgrade
· Provide EzSoftware UC software

Product specification

Category Specification
Communication type EtherCAT distributed network specification
Communication port 2 port (RJ45)
Physical layer 100 Base-TX Full Duplex (by IEEE 802.3u)
Transmission speed 100 Mbps
Transmission cycle time 0. 5msec ~ 4msec(Default 1msec)
Control Axis Max. 32 Axes
Max. Install board of System 8 board
LED display Com(Yellow), Error(Red), Power(Yellow), Link(Green)
Number of configuration nodes Max. 64 nodes
Network connection RJ45 RX/TX, Standard STP cable(above CAT6e)
Up to Max. 50m between nodes
Bus interface PCI express x 1, Gen 1
Connect RJ45 LAN
Power supply / current consumption DC 12V / Max. 800mA
Operating temperature/Humidity Temperature: 0 ~ 55℃ / Humidity: 5 ~ 95% (Non-condensation)
Storage temperature -20 ~ 70℃
Weight 216g
Exterior dimension of product 168 (W) mm x 112 (L) mm

Download

MANUAL
H/WCADWire Drawing
     
SOFTWARE more
UCRMAXLAXT
download