NETWORK CONTROLLER

PCI-Rxx04
NETWORK CONTROLLER

· RTEX(Real Time Express) Master Board
· Basic 16-axis control (Can be expanded to 20, 24, 28, and 32-axis)
· Support RTEX Standard Servo Profile, Standard I/O Profile
· Support up to 32 RTEX Slave Module Control
· Based on 30-node, data can be updated every 1.0ms
· Motion Drive (Specified distance drive, jog drive, signal detection drive,
   interpolation drive, speed / distance override)

· Motion sync drive (2 ~ 4-axis linear interpolation,
   2-axis circular interpolation, continuous interpolation support)
· Support firmware upgrade
· Provide EzSoftware UC software

Product specification

Category Specification
Communication type Real - Time Express (Panasonic distributed network specification)
Communication port RJ45
Physical layer 100Base-TX Full Duplex (by IEEE 802.3u)
Transmission speed 100 Mbps
Transmission cycle time 0.5 ms (data update: 1ms or 0.5ms)
Transmission bytes 16 byte
Control Axis 16 Axes BASE, Max. 32 Axes (Option contact board)
Max. install board of system 8 boards (Max. 256 nodes)
LED display Power(Yellow), Link(Green), Error(Red), Communication(Green)
Number of configuration nodes Max. 32 nodes
Network connection RJ45 RX/TX, Standard STP cable (above CAT5e) Min. 0.6m (between nodes, Max. 200m(total)
Bus interface PCI 2.2 , Memory Access
Connector Comm. RJ45 LAN X 2EA
Power supply / Current consumption DC 5V/ 1.5A
Operating temperature / Humidity Temperature 0 ~ 55 °C/ Humidity 5~90% (No condensation)
Storage temperature -20 ~ 70°C
Weight 120g
Exterior dimension of product 174.63 (W) mm x 106 (L) mm

Download

MANUAL
H/WCADWire Drawing
download    
SOFTWARE more
UCRMAXLAXT
download