AJINEXTEK is the company that opens the future.
NETWORK CONTROLLER
· PCI Express Type SSCNETIII/H Master Board (Mitsubishi Distributed Network Specification)
· 8, 16, 24, and 32-axis can be selected depending on the expansion board(Can be expanded up to 32-axis).
· Based on 32-node, data can be updated every 0.888ms
· Support maximum 32 module configuration
· Support firmware upgrade
· Provide EzSoftware UC software
| Category | Specification |
|---|---|
| Communication type | SSCNU III/H (Mitsubista distributed network specification) |
| Communication port | 2 port (Up to 16 slaves can be installed on each port) |
| Physical Layer | Fiber-optic |
| Transmission speed | 150 Mbps |
| Transmission cycle time | 0.888ms |
| Transmission bytes | 52Bytes |
| Control Axes | MAX.32Axes (Option contact board : 8,16,24,32 Axes can be selected) |
| Max.install board of system | 8boards ( Max.256 nodes) |
| LED display | Each port: Comm(green),Error(red) |
| Number of configuration nodes | Max.32 nodes |
| Network connection | F07PN (Fiber-optic) Inter-node:Max. 20m, Total : Max. 320m:Standard Inter-node:Max.100m, Total : Max. 1.6km:long-distance |
| Bus Interface | PCIe x1 2.5GB/s, Memory Access |
| Connector | FO x 2ea, 2 Seperated NET, Max 16Nodes onEach Net. |
| Power supply/Current consumption | DC 3.3V/Max. 1.6A |
| Operating temperature/ Humidity | Temperrature 0~50 ºC/ Humidity 5~80% (No condensation) |
| Storage temperature | -20~70º |
| Weight | 130g |
| Exterior dimension of product | 174.63(W) mm x 106(L) mm |
| H/W | CAD | Wire Drawing |
|---|---|---|
|
좌우 너비가 좁은 화면에서 내용이 보이지 않을 경우,
좌우로 스크롤(스와이프)하시면 모든 내용을 보실 수 있습니다.
| UC | RM | AXL | AXT |
|---|---|---|---|
 |
|