AJINEXTEK is the company that opens the future.
NETWORK CONTROLLER
· EtherCAT communication board (EtherCAT distributed network standard,
Software Type - requires separate RTOS installation)
· Support max 128-axis
· Support max 128 IO
· Servo and step driver support for CiA-402 (DS-402) Device profile
· Support firmware upgrade
· Provide EzSoftware UC software
| Category | Specification |
|---|---|
| Communication type | EtherCAT distributed network specification |
| Communication port | 2 port (RJ45) |
| Transmission speed | 100 Mbps |
| Transmission cycle time | 0.25msec ~ 4msec(Default 1msec) |
| Control Axis | Max. 128 Axes |
| Max. Install board of System | 1 board |
| LED display | Link(Green), Com(Yellow) |
| Number of configuration nodes | Max. 256 nodes |
| Network connection | RJ45 RX/TX, Standard STP cable(above CAT6e) Up to Max. 50m between nodes |
| Bus interface | PCI express x 1, Gen 1 |
| Connect | RJ45 LAN |
| Power supply / current consumption | DC 3.3V / Max. 1A |
| Operating temperature/Humidity | Temperature: 0 ~ 55℃ / Humidity: 5 ~ 95% (Non-condensation) |
| Storage temperature | -20 ~ 70℃ |
| Weight | 85g |
| Exterior dimension of product | 130 (W) mm x 85 (L) mm |
| Physical layer | 100 Base-TX Full Duplex (by IEEE 802.3u) |
| H/W | CAD | Wire Drawing |
|---|---|---|
|
좌우 너비가 좁은 화면에서 내용이 보이지 않을 경우,
좌우로 스크롤(스와이프)하시면 모든 내용을 보실 수 있습니다.
| UC | RM | AXL | AXT |
|---|---|---|---|
 |