AJINEXTEK is the company that opens the future.
NETWORK CONTROLLER
· MECHATROLINK-III-based 2 ch Counter Slave Module
· Counter Input 2ch (Max. 4MHz)
· Trigger Output 2ch (Differential, TTL, Open-collector)
· Built-in LED displaying status of product
· Provide EzSoftware UC software
| Category | Specification |
|---|---|
| Weight | 185g |
| Exterior dimension of product | 112(H) mm x 90(D) mm x 44(W) mm |
| Number of node | 1 node |
| Module function | MECHATROLINK-III based slave 2ch counter function module |
| Slave ID Setting | One hex rotary switch x 2 (03h ~ EFh) |
| Mounting method | Standard 35mm DIN rail mounting |
| LED display | Power(Yellow), Link(Green), Error(Red), Communication(Green) |
| Encoder input velocity | Max. 4MHz |
| Encoder count range | 28 Bit |
| Countinput signal | Signal : ENC A+,A-,B+,B-,Z+,Z- Input type : Differential input (Line Receiver) Signal leve : ANSI TIA/EIA-422-B Line Receiver |
| Trigger output | Trigger Output 2ch Signal : TRG+/-, TTL 5V TRG, TRG OC Trigger Pulse holding time : 1us ~ 50ms Type : Differential, TTL(5VDC Level), Open-collector(24VDC Level) |
| Connector | D-SUB 25pin x 1EA 5pin Power ECH350RM-05P x 1EA |
| Power supply / Current consumption | DC 24V/200mA (Connected to back plane inside the module) |
| Operating temperature / Humidity | Temperature 0 ~ 55°C / Humidity 5~90% (No condensation) |
| Storage temperature | -20 ~ 70°C |
| H/W | CAD | Wire Drawing |
|---|---|---|
|
|
좌우 너비가 좁은 화면에서 내용이 보이지 않을 경우,
좌우로 스크롤(스와이프)하시면 모든 내용을 보실 수 있습니다.
| UC | RM | AXL | AXT |
|---|---|---|---|
 |