AJINEXTEK is the company that opens the future.
NETWORK CONTROLLER
· MECHATROLINK-III Master Board (Yaskawa Distributed Network Specification)
· Support MECHATROLINK-III Standard Servo Profile, Standard I/O Profile
· 16-axis control (Can be expanded up to 32-axis)
· Support up to 32 node control
· PCI bus connection method
· The ability to retry and hot-flag provides flexibility for network operations.
· High-speed data transmission of 100Mbps
· Provide EzSoftware UC software
| Category | Specification |
|---|---|
| Communication type | MECHATROLINK-III(YASKAWA distributed network specification) |
| Communication port | 2 port (Up to 16 slaves can be installed) |
| Physical Layer | IEEE 802.3u of the standard Ethernet |
| Transmission speed | 100Mbps |
| Transmission cycle time | 0.125ms, 0.25ms, 05.ms (automatic) |
| Transmission bytes | 64 Bytes |
| Control Axis | Max. 16 Axes |
| Max. install board of system | 8 boards(Max. 128 nods) |
| LED display | NET:LK(Yellow),ER(Red),AT(Green) |
| Number of configuration nodes | Max. 16 nodes |
| Network connection | Ethernet 100base-TX Industrial mini dedicated STP cable (CAT5e) Min. 0.2M (between nodes), MAX. 100M (total)" |
| Bus interface | PCI 2.2, 32bit, Universal Type |
| Connector | Industrial mini I/O connector 1.27mm pitch 8p |
| Power supply / Current consumption | DC 3.3V/Max 1.2A |
| Operating temperature / Humidity | Temperature 0 ~ 60°C / Humidity Below 80% |
| Storage temperature | -20 ~ 70°C |
| Weight | 116g |
| Exterior dimension of product | 174.63(W) mm x 106(L) mm |
| H/W | CAD | Wire Drawing |
|---|---|---|
|
좌우 너비가 좁은 화면에서 내용이 보이지 않을 경우,
좌우로 스크롤(스와이프)하시면 모든 내용을 보실 수 있습니다.
| UC | RM | AXL | AXT |
|---|---|---|---|
 |