PRODUCT

AJINEXTEK is the company that opens the future.

PCIe-Rxx05-RTEX

NETWORK CONTROLLER

· RTEX(Real-Time Express) master board
   (Panasonic distributed network specification)
· Support RTEX Standard Servo Profile, Standard I/O Profile
· Control max 32 RTEX Slave Module
· Information can be updated every 1.0 ms based on 32 nodes
· Motion Drive (Specified distance drive, jog drive, signal detection drive,
   interpolation drive, speed / distance override)
· Motion sync drive (Supports linear interpolation, 2-axis / 3-axis circular
   interpolation, continuous interpolation, 3-axis helical interpolation)
· Support Firmware Upgrade
· Provide EzSoftware UC software

Product specification

Category Specification
Communication type Real - Time Express (Panasonic distributed network specification)
Communication port RJ45
Physical layer 100Base-TX Full Duplex (by IEEE 802.3u)
Transmission speed 100 Mbps
Transmission cycle time 1.0ms(32 Axes) / 0.5ms(16 Axes)
Transmission bytes 16 byte
Control Axis Max. 32 Axes
Max. install board of system 20 boards (Max. 640 nodes)
LED display Power(Yellow), Link(Green), Error(Red), Communication(Yellow)
Number of configuration nodes Max. 32 nodes
Network connection 100BASE-TX, STP cable(above CAT5e)
Inter-node: Max. 60m, Total: Max. 200m
Bus interface PCIe x1 2.5GB/s, Memory Access
Connector Comm. RJ45 LAN X 2EA
Power supply / Current consumption DC 3.3V, Max. 1A / DC 12V, Max. 1A
Operating temperature / Humidity Temperature: 0 ~ 50 °C / Humidity: below 80% (No condensation)
Storage temperature -20 ~ 70°C
Weight 140g
Exterior dimension of product 174.63 (W) mm x 106 (L) mm

Download

MANUAL

H/WCADWire Drawing
download    

좌우 너비가 좁은 화면에서 내용이 보이지 않을 경우,
좌우로 스크롤(스와이프)하시면 모든 내용을 보실 수 있습니다.

SOFTWARE more

UCRMAXLAXT
download

List